What is the cost to paint the trim, baseboards, and doors throughout a house in Fredericton?

Painting all the trim, baseboards, and doors throughout a house in Fredericton typically costs $1,500–$3,500, depending on the size of the home, the number of doors, the profile complexity of the trim, and the condition of existing painted surfaces. A modest 1,000 sq ft bungalow with simple flat-profile baseboards and 6 interior doors might come in at $1,500–$2,000, while a larger two-storey home with 10+ doors, detailed moulding profiles, and crown moulding throughout can easily reach $3,000–$3,500.

Trim painting is priced separately from wall painting because it's fundamentally more labour-intensive per square foot than rolling walls. Every linear foot of baseboard needs to be hand-brushed with care, often requiring taping off the wall and the floor, or a steady hand cutting a clean line without tape. Door painting is particularly slow — a single interior door with both faces, all four edges, and the door frame can take 2–3 hours for a professional to do properly. Multiply that by 8–12 doors in an average Fredericton home and you understand where the cost comes from.

The condition of existing trim makes a significant difference to both the price and the final result. Trim in older Fredericton homes — particularly homes built in the 1960s through 1980s — often has 4–6 layers of paint built up over decades. This buildup rounds off the crisp edges of moulding profiles and can cause adhesion problems as layers begin separating. A painter doing thorough work will sand the trim between coats, fill nail holes and gaps with caulk, and prime any bare or repaired spots before applying the finish coat. If the trim has significant paint buildup, stripping back to bare wood and starting fresh produces the best long-term result but adds cost.

Choosing the right finish for trim is as important as colour. Semi-gloss and high-gloss sheens are the professional standard for trim, baseboards, and doors in NB — they're durable, washable, and provide the visual contrast against matte or eggshell walls that makes trim pop. Acrylic-alkyd hybrid trim paints like Benjamin Moore Advance or Sherwin-Williams ProClassic are popular with Fredericton painters because they brush more smoothly than standard latex (fewer brush marks), level beautifully, and cure to a hard, enamel-like finish that holds up to daily handling. These specialty products cost $50–$70/gallon but produce a noticeably better result than applying a standard latex semi-gloss to trim.

Crown moulding adds significant time to any trim quote because the brush can only reach from two angles, coverage is tricky in the recesses, and the cut lines at both the ceiling and wall junctions need to be clean. If your Fredericton home has crown moulding throughout the main floor, add $500–$1,000 to the trim estimate.

For homeowners who want to DIY the walls but have the trim and doors done professionally — a very common and practical hybrid approach — Fredericton painters are generally happy to work on that scope. The result will be a clean, professional-looking trim finish that elevates the entire room without the full cost of contracting all the walls as well.

One important note if your Fredericton home was built before 1978: lead paint on trim and doors is very common in NB's older housing stock. Before any sanding or stripping of old trim paint, test for lead or discuss lead-safe practices with your painter.

---

Find a Painting Contractor

New Brunswick Painting helps you find local painting professionals through the New Brunswick Construction Network:

• Expressions Painting ✓
• Loves Painting Ltd. ✓
• Worry No More Handyman Service ✓
• Worry No More Handyman Services ✓